Fully Control a Gocator Multi-sensor System with Open Source SDK - 4.x/5.x Guide
NOTE: As of Gocator firmware version 4.6, multi-sensor systems can be set up and aligned directly in the web interface. This application guide, which describes setting up such systems using the SDK, is therefore no longer the only method for multi-sensor control and setup.
Gocator sensors can be synchronized to scan large objects at high resolution. A common requirement is to precisely control the timing of each sensor to avoid interference in areas where the measurement zones overlap, often referred to as “cross talk” between sensors.
The application note explains how users can work with the Gocator Software Development Kit (SDK) to fully control the multi-sensor system.
This application note includes example code developed using the Gocator Software Development Kit.